How to Swap a Z24 hood
How To Do It
The only difference between the Phase 1 and the Phase 2 hoods is the latch. All you need to do is drill out the factory pre marked holes on the 1st phase hood. Take off the top style latch and replace it with your 2nd phase hood piece for the bottom style latch to hook to. when you remove the piece off your 2nd phase hood only remove the bolts 1/2 way. pound on the heads with a hammer to break loose the rear threaded anchors. Be careful becaue they can fall down into the hood and are needed for the new holes you drilled on your 1st phase hood. this is the directionsto put a 1st phase 0n a 2nd phase. To do it the other way around pretty much explaines itself.