5 speed 3.1 not getting 5th and reverse

joeman67

Hey guys first time having to post a problem just broke the gate selector cable bought a new one and now the cable wont reach the selector linkage feels extremley stiff and will only move a little bit. so i rigged it up and now it will only go through the 1 to 4 gears and can't even get 5th or reverse. do i have an internal problem with the tranny maybe sync gears ??????please help me out i'm so frustrated.

bondo07 · Posted: Tue Aug 21, 2012 1:54 pm Post subject:

First make sure the cable isn't twisted or kinked. Some come coiled up in a small roll and can damage the cable that way.

heartbeat1991 · Posted: Thu Aug 23, 2012 11:06 am Post subject:

Also, Make sure it is mounted to the tranny correctly. The nut should be on the top.

heartbeat1991 · Posted: Thu Aug 23, 2012 11:07 am Post subject:

Also, Make sure it is mounted to the tranny correctly. The nut should be on the top.

SuperDave · Posted: Thu Aug 23, 2012 9:17 pm Post subject:

have someone move the shifter side to side in the car and watch the gate on the trans. I bet it's not moving all the way into the 5/R spot.

If that's the case, check to make sure it's mounted correctly

	V6Z24.com Forum Index -> Repair / Troubleshooting	All times are CDT (U.S./Canada)
Page 1 of 1

Registry Login