project Z24 SS *flaring sucks.. warning rant lol*

scott0999 · Posted: Fri Apr 11, 2008 5:56 pm Post subject:

thanks treezZ24

zmods · Posted: Fri Apr 11, 2008 6:29 pm Post subject:

oohhhh pretty.

g-u-not · Posted: Fri Apr 11, 2008 7:00 pm Post subject:

Now those are fuckin sexxy!!
How much did they run you??

joelallenclear · Posted: Fri Apr 11, 2008 7:58 pm Post subject:

mstreim · Posted: Fri Apr 11, 2008 8:44 pm Post subject:

im jelous

when you want to come down and help tune?

91z24 · Posted: Sat Apr 12, 2008 1:15 am Post subject:

You still have my address Scott, right ? Ship them whenever you're ready

scott0999 · Posted: Sat Apr 12, 2008 5:36 pm Post subject:

I plan on pulling the engine tomorrow if everything goes according to plan

also ls1 shims are here

923.4v6 · Posted: Sun Apr 13, 2008 1:05 am Post subject:

brad14 · Posted: Sun Apr 13, 2008 1:45 am Post subject:

I like those pistons

scott0999 · Posted: Sun Apr 13, 2008 9:38 am Post subject:

treeZ24 · Posted: Sun Apr 13, 2008 11:53 am Post subject:

you're welcome scott

you'll make good use of them i'm sure

scott0999 · Posted: Sun Apr 13, 2008 12:08 pm Post subject:

one of the rings has a groove on the bottom of it. is that the top ring or middle ring? it doesnt mention anything in the instructions about that..

I see which ones are for the oil just not sure about this one

weston19 · Posted: Sun Apr 13, 2008 11:56 pm Post subject:

The compression ring and the oil rings were all labled in my kit, or i think they were....

89jyturbo · Posted: Mon Apr 14, 2008 9:02 am Post subject:

The top and second rings are different thicknesses, so they are not marked in that way. They are marked with the letter 'N', which must face up when the ring is installed. The grooved ring is the 2nd ring and the groove faces down. You will need to file fit the rings.

-Kenton

	V6Z24.com Forum Index -> J-Body Performance	All times are CST (U.S./Canada) Goto page Previous 1, 2, 3 ... 6, 7, 8 ... 18, 19, 20 Next
Page 7 of 20

Registry Login