short throw shifte, will it fit an 89 z24?

blue89z24

hey yall, i still have the short throw shifter from my 2000 z24, will it work in my 89 z24?

wite89z24 · Posted: Sun Aug 12, 2012 5:26 pm Post subject:

nope. they are different

blue89z24 · Posted: Sun Aug 12, 2012 5:31 pm Post subject:

damn ok, anyone know a company that makes a short throw shifter for a 2nd gen cavy? if not ill just cut and make my own shaft i hate how tall the factory shifters are in cavys

wite89z24 · Posted: Sun Aug 12, 2012 5:36 pm Post subject:

cutting is the only way as far as i know... but i have been out of the loop for a while....there is a how to on here somewhere

blue89z24 · Posted: Sun Aug 12, 2012 5:50 pm Post subject:

alrite because i scrapped my built 2.4 ld9 2000 z24 and its still sittin in the yard un touched i was hopin some parts may be usefull but i gues not

blue89z24 · Posted: Sun Aug 12, 2012 5:53 pm Post subject:

this is the only thing iv found but iv heard HORRIBLE things about jbp.....

http://www.jbodyperformance.com/new/PartDetails.php?partId=194&catId=194&catName=JP0194

cavalier3400z · Posted: Sun Aug 12, 2012 6:43 pm Post subject:

Just cut and weld yours. If you can't weld offer a garage $20 and I am sure they will do it for you. It will take the 5 mins. I would suggest welding threaded rod on it so you can use aftermarket shifter nobs.

SuperDave · Posted: Sun Aug 12, 2012 9:04 pm Post subject:

the JBP one is just a cut down stock unit, the same thing you can do with an angle grinder/cutting disk in 5 minutes.

Check out the how-to, it works.

cahilj · Posted: Sun Aug 12, 2012 9:59 pm Post subject:

SuperDave · Posted: Sun Aug 12, 2012 10:53 pm Post subject:

blue89z24 · Posted: Mon Aug 13, 2012 9:51 am Post subject:

wats so bad bout jbp tho?

and yea im just gona cut mine i can weld just not pretty,,, but who cares a shifter boot covers it lolol

lue22 · Posted: Mon Aug 13, 2012 8:33 pm Post subject:

shit mine looks like hell when i take the boot off, I will eventually smooth it out and paint rebuilt and all that good stuff

just make shure your welds dont break it sucked when mine did had to drive in 2nd gear for 10 miles

cahilj · Posted: Mon Aug 13, 2012 10:09 pm Post subject:

blue89z24 · Posted: Tue Aug 14, 2012 12:06 am Post subject:

lmfao

and yea ill just make mine

	V6Z24.com Forum Index -> General J-Body Discussion	All times are CDT (U.S./Canada)
Page 1 of 1

Registry Login