Poly engine mounts (ready) - Place your orders

rsisbetter · Posted: Wed May 14, 2008 4:55 pm Post subject:

i do NOT think that upper brace is neccessary. As long as YOU trust the welds/work in your own car, then i trust them.

a94cavrider · Posted: Wed May 14, 2008 11:39 pm Post subject:

ok kool

brinky · Posted: Sat May 17, 2008 5:59 am Post subject:

It never breaks at the weld, but right after it. I think that brace will help a bit. I wish I picked thicker steel. I said rougly 150 without quoting the exact material, and everything added up, but will see when its done I might be able to flex the price down a bit. So I got the long weekend to make the molds. I posted the tranny mount because to me it looked a litle weak for a strong 3400/3800. I will defenely have some pics for you guys this weekend.

v6bluebird · Posted: Sat May 17, 2008 7:31 pm Post subject:

i wish i could have taken a picture of the stock mount i took off my car today. I bought it 8 days agao and put it on my car, because i removed my stock mounts and filled them with liquid polyurethane. In just a week, the torque from the stock 3400 pushed the inner metal sleeve backward 1/2", and bent the tab that's on there, to keep that from happening....

I'd put the brace on

brinky · Posted: Wed May 21, 2008 5:20 pm Post subject:

Ok, I need input... Let me nkow what you guys think. Are these strong enough? BTW, Im only selling 6 sets. First come first serve.

a94cavrider · Posted: Wed May 21, 2008 9:51 pm Post subject:

sweet where do i send the money

luminaasg · Posted: Wed May 21, 2008 10:18 pm Post subject:

Count me in for a set...
I just need details for payment.

macneil · Posted: Wed May 21, 2008 11:31 pm Post subject:

how much is your finished price, and you won't be making anymore after this? Sad

luminaasg · Posted: Thu May 22, 2008 10:20 am Post subject:

Also are we able to get the 6 you are making available died to a specific color?

a94cavrider · Posted: Fri May 23, 2008 11:07 pm Post subject:

so what would be total so i can get money ready shiped too 18014

brinky · Posted: Sat May 24, 2008 7:35 pm Post subject:

For those who are serius pm me with your details such as, color of metal and of poly, your car specs, and if you want a dogbone too. Ill take the first 6 payments and no more after that. Im also going to close up the brace from both sides box it all in. So all its left is welding in tabs, get some washers for the tranny mount, and pour it in. They need to be baked etc, so 48 hours after pour i can ship them out. I only have poly for 1 set, so I can try it out, it takes a week to order more. During that period I can test them in my car. Cheers.

macneil · Posted: Sat May 24, 2008 8:21 pm Post subject:

so will you be making more in the future? and is $250 the final price?

brinky · Posted: Sat May 31, 2008 7:54 pm Post subject:

I ordered the rest of the poly on friday, so try letting me nkow before next weekend what kind of dyes you guys want, because its a far drive...
Here is my tranny mount, I boxed the top of the brace, its only estetic.

isaachayes · Posted: Sun Jun 01, 2008 12:37 pm Post subject:

Looking good! Those supports for the poly you put inside should work well. That's how after market poly trans mounts and such are made for v8's and stuff.

brinky · Posted: Tue Jun 03, 2008 11:55 am Post subject:

well guys the time has come, everything is ready, I just need to paint and pour the mounts. There is very little chance I will be making more sets. Sanjay ordered his set so there are 5 sets left. The price is $250 for 3 mounts + $50 for a dogbone.

List of who ordered:

1. Sanjay
2.
3.
4.
5.
6.

	V6Z24.com Forum Index -> J-Body Performance	All times are CST (U.S./Canada) Goto page Previous 1, 2, 3, 4, 5 Next
Page 4 of 5

Registry Login