3400 motor mount

z-nation · Posted: Fri Jul 03, 2009 7:59 am Post subject: 3400 motor mount

well i tried to order my 3400 mount from JBP but they stopped selling it. Which sucks is there any other company that does if not ill just weld one up.thanks

brianfulcher15 · Posted: Fri Jul 03, 2009 8:00 am Post subject:

the jbp one never lined up right anyways... Youre on your own to get one made though. There is a thread on here with 3d images and the deminsions of the mount so you can take it to a shope and have one made.

quantum · Posted: Fri Jul 03, 2009 8:23 am Post subject:

i'll just be welding up my own...

z-nation · Posted: Fri Jul 03, 2009 2:34 pm Post subject:

Thanks guys ill be taking it there or getting my buddy to weld one up looks pretty simple.other thing is says in the how to form of the parts list about the upper rad hose from a montana i got the whole transport van so is that one the same.

3.1lbird · Posted: Fri Jul 03, 2009 6:02 pm Post subject:

this is what i used for my mount it accually worked pretty well just make sure she works before u weld her solid

link to the page
http://www.v6z24.com/jbodyforum/overhaulin-project-square-one-t104089,start,105.html

thumbs · Posted: Fri Jul 03, 2009 7:29 pm Post subject:

i finally got my mount today. the holes are off where it bolts to the block. but i can die grind them out. i don't know till i get the engine done to find out if it will bolt to the frame.

scott0999 · Posted: Fri Jul 03, 2009 7:31 pm Post subject:

thumbs · Posted: Fri Jul 03, 2009 7:53 pm Post subject:

no that is the one taken from the instructions from the link above. if you look at the part that bolts so the frame #9 in the link it is only tacked on. in case of needing adjustments. he said it was a pain in the ass to make. especially with out the engine in the car.

z-nation · Posted: Sat Jul 04, 2009 7:29 am Post subject:

looks good man how much you pay to have it made Im putting in my motor in the next few weeks...

cncguy · Posted: Sat Jul 04, 2009 11:12 am Post subject:

We can make some mounts if someone in the Dayton, OH area has a good one that can be measured. I would prefer to see one in the car to check for clearances and to see if/where any improvements could be made. TCE currently makes mounts for some other swaps and is looking to do more. I have been considering this for a while but there isn't enough profit to be made to justify buying an engine and car to design the mount. If needed, we could use the CMM to reverse engineer from a stock mount and a GEN-II block if someone local has one.

brianfulcher15 · Posted: Sat Jul 04, 2009 11:51 am Post subject:

oops...

93berettagt · Posted: Sat Jul 04, 2009 4:26 pm Post subject:

I bet a pm would be more effective

thumbs · Posted: Sun Jul 05, 2009 5:49 am Post subject:

i took the plans to rod's machine shop and talked to him about it he wanted 400 to make the first one. i passed on this.

brianfulcher15 · Posted: Sun Jul 05, 2009 8:02 am Post subject:

my91gtz · Posted: Sun Jul 05, 2009 6:29 pm Post subject:

if i lived closer to you cnc guy i would drop my car off to you as my motor is in my car awaiting to come across one of these mounts

	V6Z24.com Forum Index -> J-Body Performance	All times are CST (U.S./Canada) Goto page 1, 2 Next
Page 1 of 2

Registry Login