MS in a box (Stock ECM casing)

macneil · Last edited by macneil on Sat Nov 29, 2008 10:00 pm; edited 2 times in total

Lol I got bored last night and I kinda "borrowed" 89jyturbo's idea, but hey lol it's alot better then having everything hanging everywhere

anyways I still have to "Re" hook up a few wires for the fuel pump relay but no biggy, just thought I would post it up and see what you guys think.

94z24clone · Posted: Sat Nov 29, 2008 8:58 pm Post subject:

scott0999 · Posted: Sat Nov 29, 2008 10:40 pm Post subject:

sweet

I tried that but it seemed a bit crammed

macneil · Posted: Sat Nov 29, 2008 10:42 pm Post subject:

lol Yeah defanitly is lol, I just realized I still don't have everything hooked up lol

I forgot I have to get the harness for the speedo so it works soldered on still, but it seems to fit like you said it's tight but it will work, I was happy that I managed to get the relay stuck in there to lol, although looks like I am using a bigger one then you were or seb is using.

scott0999 · Posted: Sat Nov 29, 2008 10:46 pm Post subject:

heres how I did mine. mounted in the stock location

its a stock ECM case too, but I bent the back of it down so the harnesses could be further back

I never tried putting the glovebox in tho, prolly wouldnt fit

but for that matter I havent had a glovebox in the car for a few years now

macneil · Posted: Sat Nov 29, 2008 10:50 pm Post subject:

I didn't have a glove box on the blue 94 I had for a long time lol hopefully with the MS I won't have to worry about that anymore though lol, yeah I just broke the ends off my casing lol I spent like 30 mins looking for something to cut it with then noticed how it was already bent so took a plier to it

worked like a charm and only took 1 minute

sanjay · Posted: Sun Nov 30, 2008 2:32 am Post subject:

Nice..Did you use your old ABS Relay for the fuel pump??

I'm gonna be doing the same thing in a few weeks..

91z24 · Posted: Sun Nov 30, 2008 10:28 am Post subject:

At first it was a dirty fuel pump relay or something like that. I did that harness for him, tested perfect in my car

macneil · Posted: Sun Nov 30, 2008 1:45 pm Post subject:

yeah it was pretty nasty, and I forgot to send him the good one (clean one) lol so I just switched it over, thanks for doing the harness Seb

I couldn't solder it I swear you need 3 or 4 hands to do it

but Seb did it unless he is hiding a hand from all of us

drivesa5 · Posted: Thu Dec 04, 2008 8:55 pm Post subject:

That'll be nice if it works out all tucked into the stock box.

I just built a megasquirt too.

	V6Z24.com Forum Index -> J-Body Performance	All times are CDT (U.S./Canada)
Page 1 of 1

Registry Login