Username: scott0999
Name: Scott
Email: Click to Show

Location: In, Wisconsin
Posts: 11,102
Title: Ran out of titles

Date Registered:
09.11.2004 - 1:57pm

 

Engine

• 2001 Thirty Four Hundred
• Bottom end:
• Block bored .020 over
• Wiseco Forged Pistons 9:1
• Rings gapped for boost
• ARP Rod Bolts
• Top end:
• ARP Head studs
• Stainless valves
• TCE Lifter springs
• Heads Resurfaced
• Graphite head gaskets
• Manley retainers & keepers
• LS6 Valve Springs w/LS1 shims
• Trans/Driveline/shifter/ect:
• Stage 3 Clutch from EZ Clutch
• Team Green LSD insert 900# springs
• New shift cables w/ Booger poly bushings
• z24parts.com short throw shifter
• Rodney Dickmans shifter rebuild kit
• Rodney Dickmans select arm rebuild kit
• Hurst Leather stitched shift knob
• Lokar Leather shift boot
• Supercoopz24's Shift Emblem
• Cooling:
• 6 blade water pump AWP-625
• 180* Thermostat
• Slim Fan
• All aluminum radiator (some day)
• All aluminum heater core
• Intake:
• 8" K&N filter w/ 3" inlet
• TCE 65mm TB
• TCE 1/2" Plenum spacers
• Fuel:
• Racetronix 270LPH fuel pump (high volume and high pressure capable)
• Aeromotive 13301 Bypass regulator (dual feed fuel rail)
• JDM Engineering 39# injectors
• Spark:
• MSD Super Conductor 8.5mm wires
• ACDelco R42LTS plugs gapped to .030"
• Exhaust:
• 3" down to sway bar. 2.5" there on back. I'll do full 3" eventually. I "love" exhaust work.
• 2 oxygen sensor bungs. 1 for wideband, 1 narrowband
• AEM UEGO WBO2 & 3 wire heated NBO2
• Magnaflow 3" in, 2.5" dual out Stainless Muffler
• EGR and cat removed
• Turbo setup:
• Garrett T04E 50trim .60 A/R compressor, .63 A/R turbine stage 3 wheels
• TiAL 38mm V-band External wastegate
• Greddy Type-S BOV
• OBX 1/4" silicone hose
• Shorty turbo headers ceramic coated
• 3" Stainless downpipe
• PTP Turbo Blanket
• Lots of heat wrap
• 2.5" charge pipes powder coated
• Grand National 38 channel intercooler
• 2Bar MAP sensor
• 3.4 DOHC knock sensor & memcal
• Highly modified TGP chip tuned by me
• Stainless T-bolt clamps and 4ply silicone hump couplers

Exterior

• BMW Headlight swap
• HID Conversion Kit 8000k 9006
• Blackhoused Clear corners
• Anco winter wiper blades
• Wire Mesh Grill
• Shaved badges

Interior

• Autometer Carbon Fiber boost/vac gauge
• AEM Wideband UEGO gauge/controller
• Summit Racing shift light
• Lo-Tek gauge Pod
• Dynamat Xtreme

Handling

• z24parts.com custom rear shock tower bar
• Energy Suspension front and rear sway bar bushings, control arm bushings, end links
• Kumho Ecsta ASX 225/45/17s (front)
• Nitto Neogen 225/45/17s (rear)
• Fondmetal Tech 5 Rims
• Eibach Pro Kit lowering springs
• KYB GR2 Struts w/new mounts
• KYB GR2 Shocks
• New rear axle bushings
• Fenders Rolled
• Calipers powdercoated fire engine red
• Rear drums powdercoated Matte black
• Baer Decela Rotors slotted and drilled
• New ebrake cables, calipers, wheel cylinders ect
• Goodridge G-Stop SS Brake lines
• Non-abs master cylinder swap

Misc

• New fuel and brake line assembly Zinc coated
• Rust Bullet Protection on underbody
• Professional undercoating on wheel wells & rear axle
• Powder coated subframes & control arms
• under hood light from cutlass supreme (retractable & magnetic)
• Optima red top battery
• Summit Racing sealed battery box
• JEGS 300 AMP Push/Pull kill switch
• "The big 3" wiring upgrade
• Electronic Flasher
• Mounts:
• Poly Filled Front Mount
• Stainless steel dogbone
• Billet tranny mount w/poly bolt sleeve
• Fluids used:
• Mobil 1 Full Synthetic 10w30 (summer), 5w30 (winter)
• Lucas Injector Cleaner
• Synchromesh Tranny Oil (Pennzoil Syncromesh)
• Tuning Equipment used:
• TunerPro RT
• Moates.net Ostrich 2.0
• Moates.net ALDL cables
• Moates.net Memcal Adapter
• Moates.net ZIF Socket
• TOP853 Chip burner

Comments

3400 Hybrid running 8-30-05 :)
Boosted as of 6-25-06 :)
3.1 Cam died on 9-16-06 :(
Full 3400 w/boost as of 10-05-06 :)
Temporarily converted back to N/A on 10-29-07 :(
Turbo setup v2 running good 10-18-09 :)