Engine

• 90k 3400 from 2001 silhouette van 8-23-07(original swap)(7-9-08 built motor running/driving))
• Custom front engine bracket(made by me)
• #24 3.4 DOHC Injectors w/ pre-99 FPR
• 1617 cam from 60*V6 Store
• LS6 Valve Springs
• Fully ported heads
• P&P Plenum
• P&P Lower Intake Manifold
• Modified and polished combustion chambers
• ClutchNet Stage 3 clutch
• '93 W41 Tranny
• 1st 3.50
• 2nd 2.05
• 3rd 1.38
• 4th 1.03
• 5th 0.81
• Axle FDR 3.94
• 180* T-stat
• Fully Poly Trans Mount
• Fully Poly Front Mount
• Custom Poly Dogbone(Fiero bushings)
• Warm Air Intake(header wrapped)
• 2.5" Downpipe & Flex pipe
• 2.25" after the flex
• Hooker Aerochamber Crossflow Muffler
• 3" Rolled Edge Slant cut Boom Tube tips
• EGR Deleted
• Polished A/C lines
• Throttle body heater bypass
• Misc. painted engine pieces
• Coolant Fan Switch
• Relocated Coils to Strut Bar
• Custom tune by Dave(WL2)

Exterior

• Z hood
• De-badged
• Removed Side Moldings
• GFX from 89 Z, w/ wagon plate holder
• Pilot Fog lights
• Removed refractor things from tails
• Beretta GTU spoiler
• Flip-up headlights

Interior

• Sweet Pedal Covers
• Full trunk carpet from a Z24
• Rear shelf done in black vinyl
• rear side panels from 88Z(black velvet)
• Deleted middle rear seat belt
• Lighted mirror w/ switches from Cutlass 'Vert
• Switch panel where stock radio thing goes

Handling

• 17x7" Drag DR-8 Wheels
• 215/45/17 Riken Raptor tires
• Poly Control arm bushings
• Poly 30mm Front sway bar bushings
• Addco 1" rear sway bar w/ poly bushings
• Poly Sway bar end links
• KYB GR2 Shocks
• KYB GR2 Struts
• Sprint 1.7" lowering springs
• Delrin inner Tie Rod bushings w/ stainless sleeves
• Rear Engine Bay Braces (2nd Gen ph2 4 door)
• Front Engine Bay Braces (1st Gen 2 door RS)
• ABS Disabled and Removed
• Non-ABS Master Cylinder
• Welded Control Arm Seams
• Stainless Braided Brake Lines
• Ceramic brake pads

Audio

• Sony CDX-4000X Head Unit
• Pioneer TS-G95OM 3 way 220w 6x9's powered by
• Sherwood A100X4 100w/channel amp
• Boston Acoustics 3.5in dash speakers w/ bass blockers

Future

• *3400 in the Works*
• 1617 cam from 60*V6 Store
• LS6 Valve Springs
• Fully ported heads
• P&P Plenum
• P&P Lower Intake Manifold
• Modified and polished combustion chambers
• Pair of 3500 front exhaust manifolds
• .020 shaved off pistons
• 3.4 Ironhead head gaskets
• Crank scraper
• 99+ N-Body Brakes
• Beretta Z51 internal rear sway bar(+ addco)
• HID's
• Fold-down rear seat
• New Paint!!!!

Misc

• 2940lbs with me in it....
• Rodney Dickman GM FWD Shifter rebuild kit
• Aluminum Bushings For Shift Cable Ends
• High perf. stickers, 5 hp each ;)
• Factory plastic strut tower covers.
• Removal of rust is in progress, constantly!

Comments