J-Body Automobiles Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
5,820 Posts
jakerooni said:
and then once you fix the problem you actually have to clear the code or it always come on intermittently
I don't think thats true. Its not necessary to clear the code, it will remain "stored" and not be active unless its triggered again. And should clear itself after a certain number of key cycles.

I could be wrong though... dealing with ODB2 CAN crap everyday is making me forget things :x
 

·
Registered
Joined
·
289 Posts
Discussion Starter · #5 ·
Well I've been out of town and haven't had much time to touch the car but I was driving it down the highway and the heat was around 1/4-1/2 so it wasn't cold and the light would come on then shut off at random times. Did the jumper wire trick and all it told me was code 12. The light was off for the day and the next morning sure enough there was the light. What do i check for now?
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top