Check all of your speaker wiring and see if there are any grounded wires anywhere from the deck to the speaker locations.
What kind of Deck is it? I know my eXcelon has an internal amp mute feature if you want to run everything off external amps. Perhaps your deck has something similar?gord said:Hey everyone.
My deck was playing fine yesterday, then all of a sudden all the speakers stopped and the amp powering the sub and the sub were the only things working. The deck still showed the song and everything, so I got mad. I used the decks sub mute feature and then nothing was playing. So Im thinking of course, somethings wrong with the deck. Fuse is fine, everythings plugged in fine, can anyone help? This setup has been working fine for about 2 months now
i had the exact same problem with mine... it was just a crappy connection... if i turned too sharp it would do that... if i turned sharp enough in the other direction, it would come back on... just check your connectionsgord said:Hey everyone.
My deck was playing fine yesterday, then all of a sudden all the speakers stopped and the amp powering the sub and the sub were the only things working. The deck still showed the song and everything, so I got mad. I used the decks sub mute feature and then nothing was playing. So Im thinking of course, somethings wrong with the deck. Fuse is fine, everythings plugged in fine, can anyone help? This setup has been working fine for about 2 months now
What I mean by that is you need to trace your wires from the deck connection to the speakers connection and see if there is any part of the speaker wire or the speaker grouding out any place. If the speakers are in the doors, more than likely the speakers leads are touching the door metal somewhere.gord said:nah its a really straightforeward install, speaker wire to speakers and nothign else :S
What I mean by that is you need to trace your wires from the deck connection to the speakers connection and see if there is any part of the speaker wire or the speaker grouding out any place. If the speakers are in the doors, more than likely the speakers leads are touching the door metal somewhere.gord said:nah its a really straightforeward install, speaker wire to speakers and nothign else :S