J-Body Automobiles Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
1,674 Posts
Discussion Starter · #1 ·
At the ECM we have 3 connectors, now how does the callout work. I need to know where C2-B9,B10,B11 are. When I looked at my ECM I have one connection labeled "A" and two labeled "C" but with no # indication. I basically need to splice into the wire for the VSS signal to the ECM and I only want to do it from the ECM not the sensor.

I know the ECM has 3 wires dedicated to the ecm:

-dark-green ( I think this one is for the VSS signal )
-green/white
-light-blue

I dont want to just splice into anything because there are more than one wire at the ECM of these colors :cry:
 

·
Registered
Joined
·
1,674 Posts
Discussion Starter · #3 ·
DONE, middle connector B-side # 11. Dark green wire has the signal from the VSS to the ECM.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top