J-Body Automobiles Forum banner
1 - 10 of 10 Posts

·
Registered
Joined
·
410 Posts
Discussion Starter · #1 ·
I finally got around to making my clear corners. The styrene has been sitting in my basement for weeks. Yesterday I managed to get the corners out without removing anything else except the grille and I made 8 attempts are getting the styrene shaped correctly with a dremel tool. The photos don't do the corners justice, they look really good in person. They aren't perfect but I think they are good for me making them, anyways here are the photos...
<LINK_TEXT text="http://members.localnet.com/~jinx476/su ... 1.JPG"><br">http://members.localnet.com/~jinx476/sunbird/clear_corners_1.JPG"><br</LINK_TEXT></URL>>
<LINK_TEXT text="http://members.localnet.com/~jinx476/su ... ners_2.JPG">http://members.localnet.com/~jinx476/sunbird/clear_corners_2.JPG</LINK_TEXT></URL>">
 

·
Registered
Joined
·
2,601 Posts
looks great from what i can see. theres a little glossyness on the picture. the 2nd picture looks ok. try taking it w/o the flash or in direct sunlight. do they come apart as esay on the sunbirds as they do in the cavys?
 

·
Registered
Joined
·
410 Posts
Discussion Starter · #8 ·
There was way too much sun (no flash) and my camera sucks and absorbs all the sunlight. They popped out easily by using an exacto knife, i wish i had a scroll saw though to cut it a bit straigter, but you wouldn't be able to tell unless I told you it wasn't perfect.
 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top