J-Body Automobiles Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
54 Posts
Discussion Starter · #1 ·
How did you guys drill the holes to mount your fogs? It looks like it would be a really messy angle the way the opening in the bumper is
 

·
Super Moderator
Joined
·
7,650 Posts
Hmmm....
Been so long ago, I don't remember for sure. Probably just had to drill the hole in at an angle, getting it as straight as possible...
 

·
Registered
Joined
·
278 Posts
I took off some of the bolts and clips holding the bumper on. The bumper is plyable enoguh that we could just pull it forward and drill the holes from under the car. We also had a hoist to put the car up on.
 

·
Registered
Joined
·
2,291 Posts
on my car I put the drill up the back of the bumper and drilled it, (although the bumper is different on an 89) you can always try this before removing the bumper.
 
1 - 4 of 4 Posts
Top