J-Body Automobiles Forum banner

Last runs of the year

1635 Views 2 Replies 2 Participants Last post by  cahilj
1 - 3 of 3 Posts
What kind of drop do you have to have to see bump steer issues?
I have no idea. I never measured bump steer in a factory 2nd gen. I've never even measured it on this one, but I can sure feel it. The closer the tie rod ends are to parallel with the control arms the better. My control arms are parallel to the ground at ride height, and my tie rods point up at maybe a 30 degree angle. Both are way different than stock, or even a lowered car. Mine is about 3" lower than stock.
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top