J-Body Automobiles Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Hi

I am new to the group and have an issue that I hope some other members have experience with. I have a 93 Z24 with manual trans. The shifter cables are shot and need replaced. Can anyone who has changed these provide any tips, advice, watchouts, etc? I have one new GM cable and one new aftermarket cable and a free weekend coming up...
 

·
Premium Member
1988 Z24 Coupe 5spd, 1988 Wagon w/94 Auto Drivetrain, 1992 Z24 Convertible Auto, 1994 Z24 Coupe 5spd
Joined
·
2,678 Posts
Hi and welcome to v6z24 :)

These are from the 88 service manual. Pretty much everything is the same, except the cable connections at the trans (I think this is the Isuzu trans shown), but you'll see that and shouldn't have any problem there.

Hard to get to the firewall pass through. That will probably be the worst part of the job.

Good luck.
 

Attachments

1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top