J-Body Automobiles Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
259 Posts
Discussion Starter · #1 ·
Hey guys i'm doing a turbo setup in my 90z 3.1. I'm new at this kind of install so what i need is pics, print outs, blue prints.any kind of info on this. I need to see how it is done and exactly!!! what i need. I already have the T25 Garrett.and can the stock motor take it. it has been rebuilt,it also has the hypertech chip. Please help me with this. Thanks!!
 

·
Registered
Joined
·
11,294 Posts
the closest thing you can get to bolt on is TGP parts. get the TGP exhaust manifolds. you need to modify the tranny mount for clearance but IIRC thats about it.

you will need 22# injectors at least. and a chip to go with it (the hypertech one wont work). you also need a 2bar map sensor, all the oil lines and coolant lines.. you could get a TGP oil pan or drill your oil pan and add a fitting for the drain
 

·
Registered
Joined
·
652 Posts
just find a hole for the turbo and start welding its just that easy !
that poor lil 3.1 won't know whats commin hehe
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top