J-Body Automobiles Forum banner
1 - 20 of 31 Posts

·
Registered
Joined
·
278 Posts
Discussion Starter · #1 ·
Pulling apart the turbo setup, so your benefit...

--Playstation 2 Setup
Comes with all wires, 1 controller, 1 memory card, Gran Turismo 4, Twisted Metal, and some other assorted PS1/PS2 games
$100 obo, but will definately go lower

--Tons of gaskets, head, manifolds, exhaust, etc new in wrap
OBO

--GM 3.1L V6 motor, complete oil pan to throttle body, just has some of the parts off the motor in boxes
$10 plus shipping or pickup...

--1g DSM BOV with stock flange/pipe
SOLD

--Front/Rear coated exhaust manifolds from a 1990 Pontiac Grand Prix Mclaren 3.1 Turbo V6

--TGP Chip
Obo

--21#(?) Pontiac TGP 3.1 Turbo Injectors
Obo

--Miscellaneous 3400/Large Port 3100 parts
Let me know what you need, coils, lifters, rockers, heads, etc..

--Upper Intake Manifold for Pontiac 3.1 Turbo, Painted

--Custom Crossover pipe with T3 Flange made to fit Phase 1 JBody cars
--Custom Transmission Mount made to fit Phase 1 JBody cars
--Custom 2.5" Downpipe to fit Phase 1 JBody cars

--Brembo Front Discs for S14 240SX (Not sure what years, but its like the 1996 Style)
OBO

--Miscellaneous 2.5" Charge Piping, couple 45*, straight pieces, etc..
OBO




Pics on request... Let me know guys, gonna be throwing a lot more stuff up for sale so keep checking for updates... Would prefer all the turbo stuff goes together, as it was made as a kit, but feel free to poke me into separating it...

Henry[/img]
 

·
Registered
Joined
·
3,794 Posts
--Miscellaneous 3400/Large Port 3100 parts
Let me know what you need, coils, lifters, rockers, heads, etc...
Do you have any intake manifolds? I mostly need a LIM but I'd buy a set if the price is right. How much if you do have them?
 

·
Registered
Joined
·
278 Posts
Discussion Starter · #8 ·
fallenz24 said:
--Miscellaneous 3400/Large Port 3100 parts
Let me know what you need, coils, lifters, rockers, heads, etc...
Do you have any intake manifolds? I mostly need a LIM but I'd buy a set if the price is right. How much if you do have them?
Sorry man, sold the UIM/LIM a while ago to a local. Might be able to scrounge up a set though. PM me an offer
 

·
Registered
Joined
·
97 Posts
can the turbo manifolds be ported to fit 3500 heads? i cant remeber..if they can and any other deal falls thru i just might be interested
 

·
Registered
Joined
·
278 Posts
Discussion Starter · #13 ·
loner666 said:
can the turbo manifolds be ported to fit 3500 heads? i cant remeber..if they can and any other deal falls thru i just might be interested
I haven't had a look at the 3500 heads, so I am sure there is a better authority on the subject than me. But they are made to fit stock 2.8/3.1 Gen II heads, so maybe you can do some measurements. Sorry I can't be of more help.
 

·
Super Moderator
Joined
·
20,044 Posts
Sorry, there's not enough material to open the turbo 3.1 manifolds to fit the 3500 heads.
 

·
Registered
Joined
·
97 Posts
damn..o well it was worth a try..im trying to find manifold or headers that some one is selling so its one less thing i have to pay to have made when i get the car back down to have it done but not working out to well right now
 

·
Registered
Joined
·
278 Posts
Discussion Starter · #16 ·
Six_Shooter said:
Sorry, there's not enough material to open the turbo 3.1 manifolds to fit the 3500 heads.
And there is that better authority than me... Thanks six.
 

·
Registered
Joined
·
278 Posts
Discussion Starter · #20 ·
mstreim said:
its a cat back system and i would not see why not.

note: you have to have axcess to a welder
See anything on that list you might want? Welder is not a problem.
 
1 - 20 of 31 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top