J-Body Automobiles Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
6,925 Posts
ok here is a list(probably not 100% complete)

3100: beretta 94-96, malibu conception-now, grand am, 94-98?,basemodel Grand prix 97-now

3400: venture, silhouette, transport, 96+. alero conception +, Grand am 99+,rendez vous conception+, Aztec conception +.

there are a few more I believe.
 

·
Premium Member
Joined
·
5,101 Posts
88z24cavvy said:
Don't some 3rd Gen camaro's come with 3400's?!!
No. It's a 3.4, which has some differences. The biggest being that it's iron head, RWD block, and flat tappet lifters whereas the 3400 has aluminium heads and roller lifters.
88z24cavvy said:
That would be '93-up. Is there a different between a 3400 and a 3.4?
See above
88z24cavvy said:
Is the 3400 a direct drop into a 2nd gen z24?!
Not quite a direct drop in, but it's certainly doable. Several here on the forums have done it.
 

·
Registered
Joined
·
3,083 Posts
for $400 you could buy a kit that includes the motor mount needed, eprom chip, and detaild instructions. check jbodyperformance for that.
 

·
Premium Member
Joined
·
5,101 Posts
easye said:
for $400 you could buy a kit that includes the motor mount needed, eprom chip, and detaild instructions. check jbodyperformance for that.
Or if you can weld, you could make your own mount, then likely get a chip from FFP instead of spending the chunka change for the JBP kit. Just a matter of how much work you wanna do. :D
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top