J-Body Automobiles Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
288 Posts
Discussion Starter · #3 ·
Check the pics below. If yours has the rear guide as indicated by the red "X" in the first pic, I need the roller that rides in it. The second pic shows the guide removed, exposing my old worn out roller. Everything including the roller is riveted in, so you'll have to grind the back side of the rivet loose on the roller, or cut the rear portion of the regulator slide that holds the roller.
 

Attachments

1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top