[89zcar]

what would be the best way to rout the heater core lines from the engine to the heater core? its a 3.1/3400 hybrid

 

[wite89z24]

umm, they should just go striaght back to the core my man.

 

[Six_Shooter]

Using certain heater core line, I believe it was Grand AM, but don't quote me on that, the lines come out near the heater core connections, then using I beleive it's the stock heater core lines from a Ph2 Cav, they should hook right up. Again, do some serching around to be sure, there have been many variations used for this task.

 

[88cavalierz24]

i made my own, rubber 90? angles and where it goes by the exhaust is hard line.

goes motor lines/rubber 90/hard line/rubber 90/heater core.

 

[SuperDave]

get a set of lines from a 3100 Beretta/Corsica. :wink:

 

[v6bluebird]

but remember dave if you do that you have to tap the LIM for the threaded line :wink:

 

[SuperDave]

but remember dave if you do that you have to tap the LIM for the threaded line :wink:

true.. but you can still use the long front line w/o problems.