J-Body Automobiles Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
I have a 98 cavalier coupe. I wnt to put the front bumper cover and air damn of a zs4 onto it. Does anyone know if this is possible or if its an easy fit?
Thanks
Jeff!!
 

·
Registered
Joined
·
17 Posts
Should be a pretty smoooth transition. There's not really any difference in the bolt holes, or at least there shouldn't be. Just make sure you get the correct year replacement so they'll line up. And all the little pieces like wheel well inserts and all that stuff.
Joe
 

·
Registered
Joined
·
415 Posts
There are a couple of holes to be drilled and you must use the inner wheel wells from a z too. They will be necesarry for proper installation. Thats it. Good luck on your install. BTW, its a good mod and should look really tight once done. Dont forget to add the rear bumper too. Have fun.
http://www.misnblu.com</URL> "><LINK_TEXT text="http://sites.hsprofessional.com/misnblu ... "><img">http://sites.hsprofessional.com/misnblu/files/newsig42101qtrscrn.jpg"><img</LINK_TEXT></URL> src="<LINK_TEXT text="http://www.coolgraphics.com/gallery/ani ... /gobly.gif">http://www.coolgraphics.com/gallery/animations/smiley/gobly.gif</LINK_TEXT>">
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top